SkyRC charger D100 V2
The SkyRC D100 v2 is a 2-channel charger with 2 independent outputs for charging various cell technologies (LiPo / LiHV / LiFe / Lilon / NiMH / NiCd / PB). The additional use as a power supply unit with a maximum output power of 100W opens up new possibilities for the model builder. The unprecedented voice output makes operation much easier again. The new "Scan to Go" function has also been integrated. The revolutionary "Scan to Go" function offers a solution that allows each battery to be assigned its own QR code. All relevant parameters for charging or discharging this battery are stored in this QR code. As soon as you have generated the code you can stick it on the battery.
Features:
2-channel charger: The SKYRC D100 enables the connection and charging of two different battery types at the same time.
Automatic power distribution: In AC mode, the max. Energy (100W) automatically and optimally distributed to the two outputs. e.g. channel A = 70W and channel B = 30W
Data storage: The data of a maximum of ten batteries per output can be saved and called up again if necessary to compare them
Terminal Voltage Control (TVC): The user can set the final battery voltage manually, so that the maximum permissible final voltage can be set and reached according to the rules, especially during racing.
Built-in lithium battery balancer: The charger uses a built-in balancer which monitors and balances the individual cell voltage. It is therefore not necessary to connect an external balancer.
Voice output: The new voice output helps the user to navigate through the menu even faster and easier. English and Chinese language editions have been integrated into the loader.
Power supply function: The possibility of using the device as a power supply with 13.8V DC and 100W power extends the area of application considerably.
LiHV mode: The additional LiHV mode allows the charging of special LiHV batteries with a final charge voltage of 4.35V.
Bluetooth: The integrated Bluetooth 4.0 (LE) allows the user to monitor and control the device remotely via an app.
Scan-to-go: The revolutionary "Scan to Go" function offers a solution to assign each battery its own QR code. All relevant parameters for charging or discharging this battery are stored in this QR code. As soon as you have generated the code, you can stick it on the battery and scanning the code automatically starts the saved program which was assigned to the code.
Charge Master: With the PC software Charge Master, all relevant data of the loading or unloading process can be read in real time on the PC and displayed graphically.
Includes:
SKYRC D100v2 charger
2 x XH balancer adapter
2 x charging cable
2 x charging cable with XT60 connector
1 x power cable
