Kyosho FW06 Subaru Impreza WRC 2006 1:10 RC Nitro Readyset w/KE15SP - 33209B


Kyosho FW06 Subaru Impreza WRC 2006 1:10 RC Nitro Readyset w/KE15SP


Code: 33209B

Price: 454.95 €

Quantity:

Availability: In Stock

The Kyosho FW06 GP Subaru Imreza WRC ReadySet 1/10 Nitro Touring Car offers user-friendly with mild control response, making the FW-06 a great introduction to GP touring cars. 2-speed automatic transmission combines with the high-power KE15SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset.

Equipped with the 2.4GHz Syncro KT-231P+ transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P+ also features a failsafe function that automatically reduces the throttle if radio signal is interrupted *check setting before first run*. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

 
Features:
  • Equipped with KE15SP engine with slide carburetor fitted with slow idle adjustment.
  • Universal swing shafts included on front.
  • Turnbuckle tie-rods used for steering rod and rear upper arms for adjustable alignment.
  • KYOSHO's proven center-shaft drive 4WD provides light control response.
  • Disk brakes deliver reliable and responsive braking control.
  • Unique compact recoil starter starts the engine with a few pulls of the starter cord.
  • Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
  • Fitted with tuned muffler.
  • High-grip rubber tires with inner sponge supports are pre-mounted.
  • Compatible with many FW-05 parts. *Not compatible with some parts*.
Specifications:
Length: 372mm
Width: 200mm
Height: 100mm (approx.)
Ground Clearance: 5mm
Wheelbase: 258mm
Tread (F/R): 176mm
Tire (F/R): 66×25mm
Gear Ratio: 7.47 / 5.44:1
Weight: 1,800g (approx.)
Engine: KE15SP with recoil starter
 
Includes:
  • Fully-assembled chassis complete with pre-set control linkages
  • Installed KE15SP engine with recoil starter
  • Special manifold and tuned muffler
  • Finished pre-cut, pre-painted body
  • Syncro KT-231P+ transmitter
Needed to Complete:
  • (8) AA batteries for radio system
  • Fuel
  • Fuel bottle
  • Plug heater
 

Related Products